HSTuners - View Single Post

nonovurbizniz · 06-06-2003, 06:34 PM

^ you can use the integra gen that includes 93 too... not sure of the year range but the only differences are some bushings on the lower control arm...

I would HIGHLY recomend doing the master/booster and prop. valve at the same time...

I did it in under 6hrs total and I was taking my time... you'll probobly run into some problems along the way but they work themselves out ok...

for instance on mine the prop valve didn't fit the bracket so I had to bolt it to a piece of metal and bolt that to the stock spot. also the ebrake cable brackets where different so I could only use 1 per-side instead of the 2.

Oh and sohfast.com sells these in kits usually for a pretty fair price. but best deal will definately be at a local junkyard.

06-06-2003, 06:34 PM	#5
nonovurbizniz Registered User Join Date: Jul 2002 Location: ECUSA Age: 47 Posts: 2,693	^ you can use the integra gen that includes 93 too... not sure of the year range but the only differences are some bushings on the lower control arm... I would HIGHLY recomend doing the master/booster and prop. valve at the same time... I did it in under 6hrs total and I was taking my time... you'll probobly run into some problems along the way but they work themselves out ok... for instance on mine the prop valve didn't fit the bracket so I had to bolt it to a piece of metal and bolt that to the stock spot. also the ebrake cable brackets where different so I could only use 1 per-side instead of the 2. Oh and sohfast.com sells these in kits usually for a pretty fair price. but best deal will definately be at a local junkyard. __________________ I am an A$$hole... take anything I say to heart at YOUR OWN RISK...