HSTuners - View Single Post

autocrossthugg · 04-10-2003, 05:50 PM

Distortion is what kills subs (and any other speaker for that matter). The best thing to do is to level match your amp(s) and speaker(s). This can be done by turning the gains all the way down on the amp and then turning the volume to full on the H/U, then slowley turn the amp gains up until you hear a little distortion, then back it down a hair. This way you will not run out of amp power b4 you run out of speaker. Good Luck.

04-10-2003, 05:50 PM	#2
autocrossthugg 2nd Gear Join Date: Mar 2003 Location: McKinleyville CA. Age: 60 Posts: 205	Distortion is what kills subs (and any other speaker for that matter). The best thing to do is to level match your amp(s) and speaker(s). This can be done by turning the gains all the way down on the amp and then turning the volume to full on the H/U, then slowley turn the amp gains up until you hear a little distortion, then back it down a hair. This way you will not run out of amp power b4 you run out of speaker. Good Luck. __________________ Ground Control Coil-overs Eibach springs Tokico Struts(Illumina front & HD rear) Suspension Techniques Anti-Sway Bars (f&r) SPC Camber Kits (f&r) Front Upper Strut Bar Rear Lower Bar Borbet Type B rims w/Falken Azenis for autocross Kosei K-1 rims w/Yokohama AVS-ES100 for street 3-point Sparco Harness