trans only comes with the engine if you specifically ask for it or if it is advertised as a full swap. longblock means just the engine.
So for example if you wanted to put a ZC engine in your car (assuming your an Si, if not you'll need a wiring harness and new ecu) you could use your dseries transmission, but you'd need different axles (i believe 90-93 tegra shafts will work). Like I said, if you are Si, then your ecu will work. If not, then you'll need to find an integra ecu, si ecu, or ZC ecu (hard to find). The mounts you have now will work for your ZC.
Any B series will require: engine, trans, mount kit from hasport or placeracing, ecu, wiring...basically everything. If you're lucky, you may stumble across an integra at a boneyard that you can get your full swap out of for DIRT cheap.
so basically:
any D series will mount right into your car, and you may be able to use some of your factory parts.
any Bseries, and you'll need to do a full swap
any other series, good luck cause Its gonna take lotsa time and money (ie an H22)
|