|
installation is easy...you could go with an expensive wire kit or a cheep one from walmart...either would work fine......connecting the amp to the Headunit is easy.......you will get a set of RCA jacks with the wire kit.....you plug those into the back of the HU and run them to the amp......then you hook the blue (remote) wire to the blue remote out on the HU...this sends the signal to the amp...run it to the remote connection on the amp and poof thats all done........the rest is easy.....run power through the car from the battery to the distribution block then from there to the amp......then find a good place for a ground like the bottom of the trunk....clean off the paint.....bold the ground wire down then connect the other end to the amp....and poof
|