![]() |
burning oil
Hi, i have a civic LX 97' stock everything on the engine. When I checked my oil only 2,000 miles after changing it i noticed it was a quart low and had a burned smell and look to it. my engine has 140,000 miles on it. Do any of you have any suggestions of what to do?;(
|
maybe the valve cover gasket has a cut in it, mine got one for no reason at all
|
is there any way to tell if it is cut without tearing apart the engine. i was reading the repair manual and it looks a little involved. If I took the thing apart, should I go ahead and rebuild the engine. I am starting to look at ways to improve performance.
|
ok,.. is there any wet or grimy spots? cause if theres a cut in any gasket, there will be a leak. is there any blue smoke out of the exaust? when you first start it or get on it?
|
there are no leaks present and if there is blue smoke, it is only a little
|
if there is blue smoke you are burning oil. have your engine compression checked. the test kit is around $25-30. is your idle weird ? does your oil smell like unburnt gas ?
|
yes, it does smell like the unburned gas, I didn't think anything of it until I checked my oil, i have not had the car for more than 2 months. If it is burning oil, what is the best way to fix it.
|
it's more likely that your rings are messed up.
|
is there a place online where I can look for new rings with pricing. If I replace these, should i get ones with a higher compression ratio than stock? thanx
|
www.summitracing.com aroun 120 for the rings and 500 for the Pistons, pins, rings.
www.hondaautomotiveparts.com $8 a ring $25 a piston. but my guess is that you need to replace only the rings. |
thanks for the help!!!! I found some I will buy.
|
your seriously just gunna tell this guy to rip apart his motor and replace his rings without ANY diagnosis?????
are you serious.. There should at least be a little investigation. suggest cleaning the motor and searching for new oil spots after a week or two. At least do a compression and leak down test first. I wouldn't go ripping into the internals just to replace rings on a "hunch" that you got on the internet. |
All times are GMT -5. The time now is 10:10 AM. |
Powered by vBulletin Version 3.5.3
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
© 2006 HSTuners.com