Projector bulbs soldered into place?
 

I installed some Jaguar Eyes on my 92 civic and when inspecting the units I noticed that the bulbs seem to be connected to the wires through a soldered connected. How am I supposed to ever change the bulb, if I say, blew a bulb or just wanted the blue-tinted HID-look bulbs?

Is it something hat has to be professionally done?

-Chris

I've got the same question.

good luck.... you can always unsolder them and put new ones in but i dont know if that will work. it would be a challange,.... well and opertunity to excel actully..... i say just hope they dont blow.

make em last and get/use the aux lights instead

They can still be removed. It will just take some force. Solder isn't the strongest thing holding them in. Just becareful not to break anything.

I would definatly recomend de-soldering them over tearing them off.

all you have to do is heat up the metal the solder will melt and you either just pull off the wire or use a de-soldering bubble (or what ever those little squeez bottle suckers are called)