HSTuners

HSTuners (http://www.hstuners.com/forums/index.php)
-   Shifting Gears - Off Topic Discussions (http://www.hstuners.com/forums/forumdisplay.php?f=9)
-   -   Downshift to slowdown? (http://www.hstuners.com/forums/showthread.php?t=7888)

HoLun 10-04-2002 09:59 PM

Downshift to slowdown?
 
Yes I am pretty new at Drving stick, no body teach me but I got a hang of it in my 61 Ford the second try LOL, Ford is being restored, i like these old cars with fins ;) , anyway now i have a good looking 3rd gen Prelude SI 1991 and want to know if i use downshift to slow my car will it damage my engine?

ChrisCantSkate 10-04-2002 10:04 PM

considering your slip the clust back in, your only wearing the clutch

V8killimports 10-04-2002 10:09 PM

Quote:

Originally posted by 4thGenlude
considering your slip the clust back in, your only wearing the clutch

Wear the clutch or wear the breaks.... a combo of both with extend the life of both...

HoLun 10-04-2002 10:11 PM

cool! more downshift for me, sounds cool when the engine rev up and the car stopping...

theonlypunk 10-04-2002 10:14 PM

I'm not sure you save any money in the long run, I agree its fun and do it all the time. Just remember you burn gas now when trying to stop, now your burning 3 things, gas,breaks, and clutch.

94_AcCoRd_EX 10-05-2002 12:24 AM

If you blip the throttle to match revs you'll lessen the wear on your clutch. More gas consumed though.

ChrisCantSkate 10-05-2002 12:34 AM

clutch repair>brake job>gas

i'll let the gear im in pull me down a little, preludes get brake fade easy, so if im coming off the highway or slowing down at the track, i'll get use downshifting as much as possible so i can actualy use my brakes below 60mph

Racing Rice 10-05-2002 11:13 AM

Id rather wear brakes.. They are less work to change..;)

GirlRacer 10-05-2002 01:52 PM

:yes: I just read an article about that the other day. It says that downshifting to slow down does wear the clutch, & I agree with Rice, I've had to change 2 clutches now & that sux sooooo much worse than doing the brakes. Takes WAY longer & is much more expensive.

Niacin 10-05-2002 04:48 PM

Engine braking is inconsequential unless you're flying down a mountain road with the brakes on fire, so yes, downshifting is just wearing the clutch out.

Max

ChrisCantSkate 10-05-2002 06:29 PM

yeah.. and clutch jobs in FWD are a PITA. its a DIY on rear wheel if your semi mechanicaly handy, but FWD you almost godda be certified mechanic!

HoLun 10-05-2002 08:06 PM

really? damn...

slowEJ6 10-05-2002 10:41 PM

i used to do that too.....but then when i noticed my clutch was starting to go i stopped.....id rather just use my brakes more than my clutch to stop.

GirlRacer 10-05-2002 10:49 PM

:D :D Certified mechanic? I have changed my own clutch twice. ;)
I know I'm not certified, but i didn't seem to jack anything up. :crazy: so I couldn't have done that bad.

ChrisCantSkate 10-06-2002 01:48 AM

im just saying its ALOT harder... well at least a prelude clutch is

GirlRacer 10-06-2002 01:34 PM

:yes: It is harder. lotta tight spaces under my hood. I just pretty muchly disconnected my motor, but left it in the engine compartment hangin on a cherry picker I pulled up. Worked pretty well. 1st time took me 12 hours! :D 2nd time took me 8.

HoLun 10-06-2002 03:01 PM

ah that doesn't sound too bad, I got a Hoist to do it... if it needs replacement.

ChrisCantSkate 10-06-2002 03:06 PM

yeah... a hoist makes it ALOT easyer. if you are using jack stands and a 3ton jack, then its now fun

Racing Rice 10-06-2002 03:16 PM

Ahh, hondas are cake compared to AWD GSX eclipse..:yes:


All times are GMT -5. The time now is 06:48 PM.

Powered by vBulletin Version 3.5.3
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
© 2006 HSTuners.com