HSTuners - starter kill wiring

HSTuners (http://www.hstuners.com/forums/index.php)

- Electronics/Sound/Security Systems (http://www.hstuners.com/forums/forumdisplay.php?f=8)

- - starter kill wiring (http://www.hstuners.com/forums/showthread.php?t=5201)

starter kill wiring

hey geniuses,
i'm trying to install a starter kill switch in my 97 civic lx and i have no idea which wire is which. For example, what does the wire that runs to the starter solenoid or starter relay look like, what wire would i use that carries +12 volts when the ignition in the ON AND START positions? Where are these? And finally, where can ground my wire from underneath the dashboard? I would love any replies, thanks.
Jon

hmm guess i missed this post.... ground behind the kickpanel

Code:

|       ITEM      |     WIRE COLOR     |POL|       WIRE LOCATION        |

|              12V|white               |+  |ignition harness            |

|          STARTER|black/white         |+  |ignition harness            |

|         IGNITION|black/yellow        |+  |ignition harness            |

|  SECOND IGNITION|yellow              |+  |ignition harness            |

|        ACCESSORY|white/black         |+  |ignition harness            |

|       POWER LOCK|green/white         |-  |blue plug dkp or *2         |

|     POWER UNLOCK|green/orange*3      |-  |blue plug dkp or *2         |

| PARKING LIGHTS +|red/black           |   |dkp/fuse box or *4          |

| PARKING LIGHTS -|                    |   |                            |

|       HEADLIGHTS|red/wht(L)red/blu(H)|+  |steering column             |

|     DOOR TRIGGER|lt. green/red*5     |-  |factory alarm plug*2        |

|  TRUNK/HATCH PIN|blue/blk*6          |-  |dkp, harness to rear        |

|         HOOD PIN|                    |   |                            |

|TRNK/HTCH RELEASE|                    |   |                            |

|  FCTRY ALARM ARM|                    |   |                            |

|FCTRY ALRM DISARM|                    |   |                            |

|       TACHOMETER|blue                |   |test connector*1            |

|       BRAKE WIRE|green/white         |+  |brake switch                |

|     HORN TRIGGER|gray or blue        |-  |column or*2                 |

|           WIPERS|blue and blue/yellow|-  |steering column             |

|  LF WINDOW UP/DN|red/yellow - red/blu|A  |drivers door                |

|  RF WINDOW UP/DN|blue/yel - blue/org |A  |drivers kick panel          |

|  LR WINDOW UP/DN|grn/yel - green     |A  |dkp, harness to rear        |

|  RR WINDOW UP/DN|yellow - yellow/grn |A  |dkp, harness to rear        |





Notes:

*1 Drivers side fire wall under hood.

*2 Factory alarm plug located behind radio. (green/plug).

*3 Can also use blue/yellow for driver door unlock only.

*4 Male blade terminal at fuse box. Also at the back of the dimmer switch.

*5 Can also be found in a light green plug above the fuse box or bottom of drivers kick, harness to rear. For dome supervision use lt. green/black at factory alarm/keyless plug.

*6 Also available at factory alarm plug. (lt. green).

Dude u are the man!! Where did u learn all of this? Can we give a round of applause ladies and gents? gj!! Thanks for the info

:bow: :bow: :bow: brandon... once again.

hey brandon... how do you code like that? hondaman-iac is trying to put up a table for speaker sizes for a bunch of cars in the sound forum... just curious how you did that.

whatcha mean how do i do code? u mean the UBB?

{code}{/code} replace {} with []

Code:



i am the man

testing...

Code:

brandon is god of all things electrical

supa sweet brandon... and easy as well. nice. thanks.

Quote:

Originally posted by Maxvla
:bow: :bow: :bow: brandon... once again.

hey brandon... how do you code like that? hondaman-iac is trying to put up a table for speaker sizes for a bunch of cars in the sound forum... just curious how you did that.

i tried code and it does not work for some reason.