p7j bracket and ps
 

So theres this nice little rumor that you cannot use the cheaper CRV AC bracket (to retain D series compressor) and keep power steering, when swapping.
(P7J bracket is like $40 new, P54 Del Sol Vtec is over $100)

I really had doubts about this, because there was plenty of clearance on the top of the mount for the ps bracket.
SO, today I picked up a 2001 ITR pump (FREE!) and lines (FREE!) along with a Burger King door mat (FREE!) :D and started test fitting when I got home from the deepest ghettos of Detroit
*Note, not really the safest part of town....*

Anyway, here are the pics...from what I gather, there is just enough room for it to fit...but I really need to put a compressor on it, belted, to really know for sure. Still, Im 99% positive that its gonna work.




(I know the oil pump isnt on...)

I didnt even know it was possible. I should've tried! I've had to get B-series everything: PS steering brackets/mounts, PS pump, PS pump hydraulic line to the ram, A/C bracket/torque mount, and A/C compressor. What I've noticed tho is that a standard length B-series A/C belt wil not work with a B20 crank pulley.

Anyway, yours look like it will work.....

should have asked me for the ps and ac compressor. i still have them and need to get them out of the storage

you have the upper ps bracket? I could really use that!
Actually, all the mounts and crap Ive gotten for free:yes:

yeah, but it is for the jdm ps pump. if you try to use the usdm one it won't lign up with the crankshaft pulley.

ah well some guys supposed to be trading me brackets (just waiting for the mail...)
Once I get that and get things buttoned down I will know for sure (and it probably will work A-OK

any pics of the bk mat? j/k

ITR oil pump for free? you sir are an asshole :flick:

No no...power steering pump (so only a turd, not an asshole)

BK Mat:


WOO Got a belt for it today AND a bracket in a trade!
Shit is TIGHT (the adjective...not the retarded phrase)
Look at this clearance on the belt and p7j!

Its a 35.5" belt, btw...the stock integra belt (36.5-37") is way too long. *just fyi*