HSTuners - BOV Install Help

HSTuners (http://www.hstuners.com/forums/index.php)

- Turbo (http://www.hstuners.com/forums/forumdisplay.php?f=38)

- - BOV Install Help (http://www.hstuners.com/forums/showthread.php?t=19492)

Mirkwo0dForest

01-30-2004 07:22 AM

BOV Install Help

ok so there's this pipe i have going into my intake (charge pipe i gez is wut u uys would call it) and i hav this thing... a BOV... do i just drill a hole and weld it on? i don't wanna weld it on then find out i wont supposed to...

4drmadness

01-30-2004 11:04 AM

what kinda BOV do you have..as that could help us to determin how the install would go...
some of them require an adaptor kit that you can drill the hols and weld the flange to the pipe etc...

sohc_vtec 2NR

01-30-2004 02:59 PM

a picture would be nice.....

thermal

01-30-2004 06:45 PM

Most BOV must have a flange that will require to be welded on the charged pipe

Mirkwo0dForest

02-05-2004 03:34 PM

never mind... igot a DSM one that comes with the flange and pipe... thanx though

thermal

02-06-2004 02:27 AM

good job!:yes:

All times are GMT -5. The time now is 12:16 PM.