Which wire for Tach?????
 

Hi all.

I've got mu Autometer guage all mounted into my car and all and I have everything operational but my hook up to the coil to actual get my read out. does anyone have a pic of the wire they tapped into at the cluster/ECU or Distributor that I can use to go by?

this would be great. I have tried to decode the Haynes manual to do it but that's a waste of my time. Appreciate the info.


Thanks....

i dont have a pic but the wire is really easy to locate... if you know where your distributor is, you'll see to set of connectors w/ wires.. you want the connector w/ 2 wires.. those wires are going to the positive and neg. of the coil.. the BLUE wire is the negative signal... tap into that (do not cut wire) and youre all set... i just did this project for my 94 dx... goodluck!!!

Thanks for the info SWIFT...I could have swore that I tapped into that once last time and it spun the Tach needle the opposite way...

I'll look at see..thanks;)

it was indeed the Blue wire on the one plug...thanks for the info


works like a charm now...;)

anytime... ::yes:: post some pics so we can see it... i will too when im done w/ the film..