sir help
 

ok so i'm missing my power steering pressure switch
i know it one end goes here(photo below) but where does the other end go someone please help!!!!

so can on one help or does anyone not want to help

Sorry but Im going to move this to the civic forum also.....get more attention there.....

on my accord one is liked to speed sensors in the tranny if i'm not mistaken.

all the power steering pressure switch does is raise idle when you turn a certain amount at idle, like in a parking lot. one end should go in the steering rack and the other end should make it's way to the ecu one way or another. unless it's giving you a check engine light or you're having trouble keeping your engine from stalling when you try to park, i'd say it's really not a big deal

calling out civic addict on this one. he has the same car, only black

its not really a big deal to me it should start warming up soon.
i talked to a honda dealership there serviice tech says it goes from the engine harness to the rack

the car makes a horrible sound when i have no power steering

Horrible.
It sounds like a supercharger!!!
hahahaha
because the oil isn't being pumped through

Heh... I kinda missed this one.

I'll get you a pic when I get home(about .5 hour or so).;)

sounds good

Sorry for the fuzzy pic. Its like 13 degrees outside.

It should be a wire harness. I'll try to get you a clearer pic. It just has 2 wires coming out of it. I'll look to see where it goes in a bit if you want.

Close up

Where the wire leads to....

Distance shot... The harness leads under the intake manifold.

Hope this helps you out....

-Addict

yeah sorta
you can't see where it leads too?

I couldn't tell. I'll check it out tomorrow.

sounds good

Thanx Addict

is it low on ps fluid? is the belt in good shape? the pressure switch shouldn't cause you to lose your power steering, it's just an input to the ecm to control idle speed

yeah but when it's -40 it does