6 disc stock deck
 

hey guys, got a question.. how do i remove a stock 6 disc deck out of a 2002 accord coupe.... i dont want to ruin the molding around it so i want to kno a step by step.. so far i took out the 2 bottom screws, and the screw behind the clock... but it is still tuff to get out so is there ne other screws or shyt that i needa remove.. ????/


02coupev6

nvm, i got it out

Hey how did you get access to the screws?
 

I tried to remove mine, not knowing there were screws in there. Well I did ruin my front panel. How did you get those suckers out?

There are 2 screws on teh bottom, and 1 screw behind the clock. Take out the clock wit a flat screwdriver. Grab behind the air vents and pull it out gently wit some force. There are 5 clips, 2 on the top, 1 on each side, and 1 on the bottom. After that is removed then there are 4 screws around the deck.. remove those and ur done.. this is for the 6th generation accord.


02coupev6

Thanks
 

Its about the same for my Civic, except for the clock part. I finally figured that crap out.