P54 a/c bracket stuff
 

I know I need the p54 or the crv a/c bracket, and I know that my tension wheel and that for the Bseries are the same.
I just want to confirm that I need a couple things:



20 - Bolt 90054-P30-000
17 - Collar 38944-P2T-000
21 - Bolt 90086-PR3-000
15 - Bracket (This is different for del sol, em1, dc...go with em1? Matter?)

hmm i have no clue but if you give me the year and the model of the car your engine came out of i can check it for you with the dealership. also i can get them for you :D

Well the y8 a/c pulley crap is slide type, where this is some little arm thingy (part 15^). If I were using a B compressor Id just get em1 parts, but I gotta mix-n-match since Im using the D compressor on the b18b

All B-series should be the same. I'm using an A/C assembly from a 97' Teg GSR. This includes: brackets (torque mount), pulley, pulley bracket, A/C. However, I had to get a CRV A/C belt since the crank pulley I was using is still stock CRV.....

I wanna do the same thing use my y8 compressor on the b18, not to change subject but is the power steering the same anyone know???

I dont think that's gonna work pdiggs. I tried it. The D compressor will not bolt to the B mount/bracket. I already tried....

Sicones, The power steering is different too. You must use a B-series pump. The bolt pattern is not the same on either the A/C or the PS. You can still use your existing reservoir. You will also have to either replace the hose that goes to the ram or modify the D fitting. I cut my D fitting and used a B fitting. I welded that fucker and it works great!

It does work w/ the p54 a/c bracket (off a del sol vtec). Ive heard rumors that the crv bracket also works, but Ive never gotten any sort of confirmation.

on the ps, where the hose turns to metal and the two bolts go though, can you just use the b metal part and one of those hose to hose connecting things with the teeth and hose clamps