HSTuners

HSTuners (http://www.hstuners.com/forums/index.php)
-   Civic/Del Sol (http://www.hstuners.com/forums/forumdisplay.php?f=12)
-   -   Another question about DX mods (http://www.hstuners.com/forums/showthread.php?t=3084)

JunoMech 02-20-2002 08:42 AM

Another question about DX mods
 
Ok! I have decided I wanted to mod my car but where do I start?
I already have an AEM long air intake. I really didn't notice any difference when I installed the intake. Should I go ahead and do the headers and exhaust? Or should I just wait till I drop that h22 or B18cR. But the engine swap probably won't happen till next year.

Your suggestions will and would be GREATLY appreciated.

:confused:

4jacks 02-20-2002 08:47 AM

:| HMmmmmm (they need a better HMMMMmmmm face)

I wouldn't spend any money on the Old engine that won't fit on the new engine, Like I doubt Headers from the 1.6L will fit the 1.8L , but I think an Exhaust would be a safer bet. If your set on doing the swap I would save up the money for the swap, and make that your next mod, but if you wanna do some mods meantime, I would start w/ exhaust and then move on to suspension, or other things, as not to waste your money.

Hope it helps

JunoMech 02-20-2002 08:54 AM

Any recommendations for exahust?

VTC_CiViC 02-20-2002 08:58 AM

Quote:

Originally posted by JunoMech
Any recommendations for exahust?

If your going with a swap, get something nice and quiet. A GReddy PE or Apex'i N1 would do the trick.

Whtehnda93DXSdn 02-20-2002 12:40 PM

I would say go for the exhaust but not headers if you are goin to do a swap as they will then just be sold to someone else or just sit inyoru garage/room..

You could do inexpensive mods like Plugs/wires and get a little spark goin on there..or maybe even a MSD ignition to go along for better spark and HP...

Hoep this might help...

littlered 02-21-2002 06:11 PM

upgrades
 
i have 2 gen4hb'. dont do anything to the engine. it is not worth it. JDMHONDAPARTS.COM has a b16a swap for $1250. and you can get the mouts and harnes for arround $500. That is what i suggest. sell the old engine and save 250. then you get the VTECH and DOHC and 160HP. you will not get the 160HP out the the d15. maybe even swap a ZC in but for the effort i would suggest the b16a. If it helps any theres my two pennies.

JunoMech 02-21-2002 08:24 PM

Well I decided that my next mod would be suspension. I found some deals on the net for some Skunk2 coilovers and KYB AGX shocks for under $600. But I still have to get camber kits and then an allignment. Uhhhh, if aint't one thing it's another. Gotta love my Civic!


All times are GMT -5. The time now is 05:41 AM.

Powered by vBulletin Version 3.5.3
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
© 2006 HSTuners.com