HSTuners

HSTuners (http://www.hstuners.com/forums/index.php)
-   High Performance (http://www.hstuners.com/forums/forumdisplay.php?f=37)
-   -   air intakes (http://www.hstuners.com/forums/showthread.php?t=11034)

krz2fer 01-08-2003 09:38 AM

air intakes
 
I'm getting ready to get an intake for some more hp on my civic... I've heard/read aem is THE best. Any thoughts on that?

Also, is there much of a difference between aem's short ram and regular intake? Short ram says its an "under the hood" version.

thanks:bow:

94_AcCoRd_EX 01-08-2003 12:00 PM

AEM is the way to go.

CAI vs. short RAM: For every 10 degrees colder air you intake, you gain approx. 1% hp. Obviously from this, the CAI is the way to go.

krz2fer 01-08-2003 12:16 PM

I've heard about enclosing your CAI filter in a box type of thing to get the most cold air which also shields the engine from heat. Is this really needed or no?

94_AcCoRd_EX 01-08-2003 12:47 PM

Quote:

Originally posted by krz2fer
I've heard about enclosing your CAI filter in a box type of thing to get the most cold air which also shields the engine from heat. Is this really needed or no?


Ermm.... not really. I'd just get the CAI and install it normally. It already sits down in the bumper away from most of the heat. If you were an extremely serious drag racer, then yes, you might do that.

krz2fer 01-08-2003 01:54 PM

Haha yeah that's what I figured... how about that optional value to keep out water? It's like 40 bucks... is that un-needed, too?

94_AcCoRd_EX 01-08-2003 06:49 PM

Quote:

Originally posted by krz2fer
Haha yeah that's what I figured... how about that optional value to keep out water? It's like 40 bucks... is that un-needed, too?


Do a search on "bypass valve". This has been debated, but the general concensus is that you only need it if you drive where there are a lot of deep puddles.

silver 01-08-2003 07:15 PM

ditto:yes:

ChrisCantSkate 01-08-2003 09:42 PM

even though they say no power loss... i think the water seperator lets hot air in the intake

94_AcCoRd_EX 01-08-2003 09:44 PM

Quote:

Originally posted by ChrisCantSkate
even though they say no power loss... i think the water seperator lets hot air in the intake


You talking about the AEM bypass valve? AEM claims a 1-3hp loss with it FYI.

ChrisCantSkate 01-08-2003 10:09 PM

Quote:

Originally posted by 94_AcCoRd_EX
You talking about the AEM bypass valve? AEM claims a 1-3hp loss with it FYI.

good to know... its the dry season

94_AcCoRd_EX 01-08-2003 10:15 PM

Quote:

Originally posted by ChrisCantSkate
good to know... its the dry season


Ugh, not here. I almost hydrolocked the other day when I was spacing. Scared the crap out of me when I hit the super deep puddle from a clogged drain.

I'm putting my BPV in tomorrow for a month or two.

krz2fer 01-09-2003 10:50 AM

sounds cool.. are there any other ways to get HP besides an intake and new exhaust system? or is that about it without a new engine.

silver 01-09-2003 11:02 AM

i guess you need to learn the basics of a motor.
i will forgo the header since everyone will talk about that. A new camshaft(or shafts depending on the number of cams) Advancing the timing of the engine(changing the intake stroke), increased air flow through the entire motor(throttle body, intake manifold, blah blah blah) Stroker kits to increase displacement, forced induction, nitrous, there are a million more. Just read up on the aspects of how a motor works.

krz2fer 01-09-2003 02:22 PM

thanks


All times are GMT -5. The time now is 03:50 PM.

Powered by vBulletin Version 3.5.3
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
© 2006 HSTuners.com