How To Check CEL CODE?
 

ok so i baught a 1995 civic si motor is the D16Z6 Vtec, and am repairing it now, i start my car and my engine light is on, and when i rev it it wont go past 4000rpm it boggs out, so people told me to look for a 2 pin connector under dash so i found a blue one (but apparently its suppose to be a grey one in the 92-95 civics correct?) and so i did the pin (a paper clip) in the 2 pin conector and instead of my engine light giving me the code, its my SRS (airbag) light giving me a code of 11 , 1 long blink 1 short, and then lights up and stays there, and there is no such code 11, can someone help me out with this? thanks guys i appreciate it.

theres another one under there... keep looking

its actually a BLUE connector, someone posted that its a grey one but it is a blue one the one i was testing, but apprently i have a wiring issue or something ????

First thing is first. Reset the ECU. See if this CEL comes back. If it does, then proceed to start counting those blinks. Yes it shold be a blue one with 2 wires going into it.

Look into this also:
http://www.hstuners.com/forums/showt...&threadid=2300