Springs and Struts
 

Im looking to lower my lude and i would like to get a set of lowering springs and struts. Now since i don't have a spring compressor, i can't see a way to install the springs on the new struts -- but as i was thinking, since the lowering springs will be smaller than stock, do i even need a compressor? Can i just slide on the new springs and they will tighten themselves when the car is put back on the ground.

Any insight on the easiest way to do this would be great!!

i didn't need a spring compressor to install my springs. However i needed one to remove the old spring (you will need the upper spring seat and the bushings from the old suspension). I don't know guys if u have any murray stores around you but i rented for free a sring compressor from them.

As for shocks get koni yellows.

yup
 

thats what i figured, i would atleast need the new seats and all the dumb hardware -- i will look into renting a compressor -- any other tips would be great

don't get polyurethane bushings if u care about the ride quality. how much do u want to lower ?

lowering
 

well im not sure. I plan to get a set of 17's this spring and my buddy got a set of eibach sportline springs which he never put on his Del Sol - i am almost 100% sure they will fit on my ride so it looks as if im going to buy them off of him. So as an answer, i really am not sure how much i want to lower it. I don't want to hit roadkill on the road with the chassis but i want it to improve handling and look tiiiiight.

Conclusing, 1-2" ?? -- sound right?

no as far as i know the springs won't fit. and eibach sportlines will lower the car 1.8".

they will not fit. your car is too heavy for those springs, you will hate your ride quality, the car will sit funny and will handle like ass.

damn it -- so buy some eibach's new for my car with some koni yellows??

that sound good??

yup. or get tein true coilovers

That would be a great combo.

u can rent a spring compressor for free at pep boys.. i just had to put a deposit down and they gave it back when i brought the tool back..

:yes: