WTF ??? real big engine trouble
 

As all of you know i embarked on a pretty big project about a month ago and changed the timing belt and the bushings on my car. well today another surprise when i started running the car to bleed my brakes. After the car would warm up i would get a load of white smoke coming out of the exhaust. After i stoped the car and started it again after 2 hrs i noticed that there would be oil dripping down from between the header and the cat, so i decided to take the sparkplus off and inspect them, and see of there is anything in the engine. well # 1 sparkplug was full of oil, and the cylinder was also filled up with oil. tomorow i am taking the head off and see what the hell is going on. also after i noticed the oil i did a compression check and that cylinder read a whoping 250psi.

250psi!


Jesus christ on a cracker!

..Blown head gasket?

..Blown valve seals?

:confused:

What was the conclusion!?

well the head looks good so far. i need to clean it up and take the valves off.

valve guide seals possibly

well i think those wouldn't leak quarts of oil in the cylinder.

Are the rings shot?