HSTuners

HSTuners (http://www.hstuners.com/forums/index.php)
-   Integra (http://www.hstuners.com/forums/forumdisplay.php?f=26)
-   -   ls tec (http://www.hstuners.com/forums/showthread.php?t=26135)

IALuder 02-28-2006 11:09 PM

ls tec
 
Just wondering how many people has had good results with ls vtec and how hard is the wiring

thermal 03-04-2006 09:55 PM

I've never actually ran one, but I've assisted on several LS/CRVTEC aseemblies. Easy stuff. Wiring is just two wires: VTEC solenoid and VTEC oil pressure sensor. Must have a VTEC ECU of course. WE never had any issues with ours. Even the boosted ones.

KwikR6 03-05-2006 12:10 PM

From what I have heard. Build them well, and properly. And they will last just fine.

sicones 03-13-2006 11:11 AM

isn’t there something you have to do to the block for an oil passage??

thermal 03-13-2006 06:14 PM

Yes, you have to tap the oil passage on the VTEC head. There is a plugged hole on there that you must run an external oil line for. You also have to use the proper size dowel pin for the internal VTEC oil passage. In other words, get the Golden Eagle VTEC conversion kit. It is worth the $$$. It even comes with the headgasket and precisely machined dowel pin. Plus the external oil line, fittings, and oil filter sandwich adapter.........

If you use a GSR Head with an OEM intake manifold, then you will have to wire the secondary butterfly also.

lotofsad1 08-25-2022 03:29 AM

Hulu did not immediately respond to Foxcs
 
y 2 pasillos en la provincia de Ala, apartamento de hospital, escuela de metro, carretera a 3 kilómetros, a partir de 158 metros cuadrados, si


All times are GMT -5. The time now is 06:33 AM.

Powered by vBulletin Version 3.5.3
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
© 2006 HSTuners.com