HSTuners

HSTuners (http://www.hstuners.com/forums/index.php)
-   Others (http://www.hstuners.com/forums/forumdisplay.php?f=13)
-   -   Got the rest of my parts today, rebuild is officially underway... (http://www.hstuners.com/forums/showthread.php?t=18500)

delsolvtec 11-12-2003 01:43 AM

Got the rest of my parts today, rebuild is officially underway...
 
Project 11 second single cam sol is underway... Wish me luck...

Pics of the progress thus far...

Head is sitting at the machine shop right now getting all new valves with Ti retainers and double valve springs along with a race grind and an extreme port and polish. (costing me about 900$)... ouch...

Turbo is at another shop being modified to push a conservative ;) 17psi...

It's going to be a JDM ZC block and a USDM 1.6 Vtec D16Z6 head..












ebpda9 11-12-2003 02:58 AM

nice :yes: is it gonna be vtec tho ?

delsolvtec 11-12-2003 12:22 PM

Yes, hence the VTEC head..

ebpda9 11-12-2003 04:04 PM

Quote:

Originally posted by delsolvtec
Yes, hence the VTEC head..
i am pretty clueless about the civics/del sols, pretty much anything that does not involve a prelude or an accord.

KwikR6 11-14-2003 11:12 AM

Damn man...good luck...keep us posted...
sooo envious.

pdiggitydogg 11-14-2003 11:35 AM

"conservative 17psi"
...nice :yes:

KwikR6 11-14-2003 11:51 AM

Quote:

Originally posted by pdiggitydogg
"conservative 17psi"
...nice :yes:


Yeah i like that saying.

delsolvtec 11-14-2003 12:12 PM

ha ha, yep, conservative... ;)

I took a few more pics last night after I picked up the head and oil pan from the machine shop.. Enjoy..




















KwikR6 11-14-2003 12:36 PM

Looking good.
I need money;(

delsolvtec 11-14-2003 02:14 PM

So do I, the dang headwork just tapped me out for almost a grand. 4 angle valve job, replacing 4 bent valves, new seals, 30 thousandths deck, port, polish, extrude hone... $$$$$$$$ My bank account is near empty...

KwikR6 11-14-2003 02:49 PM

No shit...I have been wondering where you have been...and well...this makes sense...I haven't talked to you for a while...

delsolvtec 11-14-2003 05:58 PM

Yup, I have been glued to the garage man. I've been busy with measurements, balance weighting, machining, painting, cleaning etc... Just waiting for my back ordered ARP head studs and my poly motor mounts to get here. They are the only thing holding me back right now. Two of the things that I forgot to order and they are both on back order....

autocrossthugg 11-14-2003 07:05 PM

Nice. Send us copies of your time slips when it's all said and done. Keep up the good work.

delsolvtec 11-14-2003 08:43 PM

I'll defenately be posting up time slips (next year obviously) and dyno sheets once the car is back together and broken in. I can't wait to flip that switch for the ZEX.. Oh I can't wait.... I'll probably blow the engine again in a month... but oh well..

KwikR6 11-17-2003 03:25 PM

Quote:

Originally posted by delsolvtec
Yup, I have been glued to the garage man. I've been busy with measurements, balance weighting, machining, painting, cleaning etc... Just waiting for my back ordered ARP head studs and my poly motor mounts to get here. They are the only thing holding me back right now. Two of the things that I forgot to order and they are both on back order....

Oh I would rather be spending time in the garage then on the computer also man
I don't blame you.

brbsqskp 11-19-2020 07:55 AM

I do not think so

Craig Robin 11-30-2020 08:56 PM

Quote:

Originally Posted by brbsqskp
I do not think so


This forum is really old, I am not sure if you check the date before deciding to join the thread.

Bitte 02-18-2021 01:51 PM

New Asian girls come here for the first time.so good.


All times are GMT -5. The time now is 05:47 AM.

Powered by vBulletin Version 3.5.3
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
© 2006 HSTuners.com