91' ZC (D16A) Dohc Non-Vtec Engine spec's

[VT1-R]

Does anyone have full spec's for this engine?

Normally found in the 89'-91' CRX (Jap model).

I'm interested in most the the cc of the Head.

Any information will be a big help.

[KwikR6]

http://www.makuragi.s5.com/faq/honda/
Look at that.
As for the CC's of the engine..if it's 1.6L it will be 1600cc's wont it?
400cc's per cylinder at BDC

[VT1-R]

http://www.members.optushome.com.au/btn2000/head.JPG

The volume in red is what i'm looking for.... should be any where between 34cc-43cc

eg. A B16A head is 42.X cc

[KwikR6]

So you want the TDC volume right?
it'll be 43cc's
what's the compression ratio on those....anybody else know?

[VT1-R]

Thanks for the info.... the compression ratio (stock) should be around 9.5:1

[KwikR6]

Then the TDC will be 42.105263 or 42.1

[diligent_dave]

That sounds pretty close. The b16s and b17 are all at 42.7 cc's the ZC should be right around there.