PDA

View Full Version : starter kill wiring

jeq214
05-21-2002, 09:31 PM
hey geniuses,
i'm trying to install a starter kill switch in my 97 civic lx and i have no idea which wire is which. For example, what does the wire that runs to the starter solenoid or starter relay look like, what wire would i use that carries +12 volts when the ignition in the ON AND START positions? Where are these? And finally, where can ground my wire from underneath the dashboard? I would love any replies, thanks.
Jon
BrandonClaps
05-29-2002, 10:34 PM
hmm guess i missed this post.... ground behind the kickpanel

| ITEM | WIRE COLOR |POL| WIRE LOCATION |
| 12V|white |+ |ignition harness |
| STARTER|black/white |+ |ignition harness |
| IGNITION|black/yellow |+ |ignition harness |
| SECOND IGNITION|yellow |+ |ignition harness |
| ACCESSORY|white/black |+ |ignition harness |
| POWER LOCK|green/white |- |blue plug dkp or *2 |
| POWER UNLOCK|green/orange*3 |- |blue plug dkp or *2 |
| PARKING LIGHTS +|red/black | |dkp/fuse box or *4 |
| PARKING LIGHTS -| | | |
| HEADLIGHTS|red/wht(L)red/blu(H)|+ |steering column |
| DOOR TRIGGER|lt. green/red*5 |- |factory alarm plug*2 |
| TRUNK/HATCH PIN|blue/blk*6 |- |dkp, harness to rear |
| HOOD PIN| | | |
|TRNK/HTCH RELEASE| | | |
| FCTRY ALARM ARM| | | |
|FCTRY ALRM DISARM| | | |
| TACHOMETER|blue | |test connector*1 |
| BRAKE WIRE|green/white |+ |brake switch |
| HORN TRIGGER|gray or blue |- |column or*2 |
| WIPERS|blue and blue/yellow|- |steering column |
| LF WINDOW UP/DN|red/yellow - red/blu|A |drivers door |
| RF WINDOW UP/DN|blue/yel - blue/org |A |drivers kick panel |
| LR WINDOW UP/DN|grn/yel - green |A |dkp, harness to rear |
| RR WINDOW UP/DN|yellow - yellow/grn |A |dkp, harness to rear |


Notes:
*1 Drivers side fire wall under hood.
*2 Factory alarm plug located behind radio. (green/plug).
*3 Can also use blue/yellow for driver door unlock only.
*4 Male blade terminal at fuse box. Also at the back of the dimmer switch.
*5 Can also be found in a light green plug above the fuse box or bottom of drivers kick, harness to rear. For dome supervision use lt. green/black at factory alarm/keyless plug.
*6 Also available at factory alarm plug. (lt. green).
jeq214
05-30-2002, 11:38 AM
Dude u are the man!! Where did u learn all of this? Can we give a round of applause ladies and gents? gj!! Thanks for the info
Maxvla
05-30-2002, 11:48 AM
:bow: :bow: :bow: brandon... once again.

hey brandon... how do you code like that? hondaman-iac is trying to put up a table for speaker sizes for a bunch of cars in the sound forum... just curious how you did that.
BrandonClaps
05-31-2002, 10:16 AM
whatcha mean how do i do code? u mean the UBB?

{code}{/code} replace {} with []



i am the man
Maxvla
05-31-2002, 10:26 AM
testing...

brandon is god of all things electrical
Maxvla
05-31-2002, 10:27 AM
supa sweet brandon... and easy as well. nice. thanks.
BrandonClaps
05-31-2002, 02:46 PM
http://civicsi.mine.nu/werd.gif
ebpda9
05-31-2002, 03:10 PM
Originally posted by Maxvla
:bow: :bow: :bow: brandon... once again.

hey brandon... how do you code like that? hondaman-iac is trying to put up a table for speaker sizes for a bunch of cars in the sound forum... just curious how you did that.

i tried code and it does not work for some reason.