Its alive...finally

[Boosted3g]

Well after 6 months of hard work my car is done and has taken its first voyage on the street (so what if i dont have 4-ways, turn signals, or a state inspection). Anyways i only havve about 6 miles on it so i gave it about 4 psi in 2nd and it ripped the tires loose all the way to 6k (dont want to rev it too high yet). I am damn impressed with the car and it should run hard. Heres all the work that i did on the new motor. Ill be posting some pics in the next few days.

GE sleeved 85mm o-ringed LS block 2022 cc's
balanced and polished LS crank
Crower rods
JE 9.8:1 pistons
stock Honda bearings
1mm oversized Ferrea valves
bronze valve guides
race only port job
Crower ti retainers
Crower dual valve springs
Crower 62404 cams
Skunk2 cam gears
ported Venom sheetmetal manifold
Edelbrock 65mm GRS tb
720cc RC injectors
5 gallon fuel cell
AEM fuel rail and regulator
Aeromotive A1000 fuel pump
Axexi Power FC with 3 bar conversion
SFP tubular manifold Jet Hot coated
HKS super sequential BOV
Turbonetics 42mm Racegate
Garrett 60-1 turbo
3" custom downpipe
3" Thermal exhaust
LS trans with Quaiffe diff
custom 10 point cro-moly roll cage

Ill see if i can ge the pics up by tonight. Happy boosting

[97CivicFerio]

OMFG, what a setup! Holy Shit! How does it run? Damn man, have fun and be safe!!!:D

[KwikR6]

**** **** **** **** **** **** Geeze that's amazing ****
Wow.....I kan't wait to see some pics and some time slips and some dyno slips.;)

[Boosted3g]

Yeah its pretty cool. I can break the tires loose through 1st and second at only 3 psi. The car is totally gutted except for the dash shell. I expect the car to do 10s without too much difficulty because the of the fact i was able to do mid 11s with half of this amount of work and a fairly stock block. The pics probably wont be up tonight i have to get my lazy ass up and get the film developed.

[KwikR6]

No worries....im a paitent boi....NOW NOW NOW!!!! hahaha:crazy: :paranoid:

[xbird]

so is it only for race?/ or street??

if it's for street............ OMMMGGGGGGGG

[Boosted3g]

Yeah its for the street. All i have to do now is hook up the nitrous and get it inspected. Ive been driving it around for a while but sooner or later im going to get caught. Oh yeah i have to get a new turbo now too. I blew it up today but i can get a new one in a week or so. Hopefuly it will be covered under some sort of warrenty, it only has 138 miles on it.

[94_AcCoRd_EX]

Originally posted by Boosted3g
I expect the car to do 10s without too much difficulty because the of the fact i was able to do mid 11s with half of this amount of work and a fairly stock block.

Wow, that's really fast. I'd love to see a vid of you running sometime.

[thermal]

that is bad ass!!!!!! i'm drivin up to check it out bro!;)

[Grey16]

were's the pics!!! that sounds like a mean setup.

[juvenile]

How did you blow the turbo?
btw...AMAZING setup
:bow: :bow: :bow:
can I be your peasant sitting in shotgun all the time :D

[ShEaNy]

HOW DID U know to gET ALL THAT SHIT LOL ..and how much did it cost ... thats insane!!:bow:

[Boosted3g]

Thats what sponsers are for. Any ways what happened was i shattered the oil pump gear and obviously it lost oil pressure and F'ed everything up. Well ill have the pics up soon. I had spend the last 2 weeks getting the motor back together. Its running again and i have 349 miles on it now. Ill get the pics sooner or later.

[97CivicFerio]

That is one hell of a street car. Be very careful though. Sounds like it is scary fast!

BTW, where are the pics!?

[blownteggy]

are planning on swapping out the tranny? the gearing of the ls tranny is kinda long.

[xbird]

i really don't know what to express my feelings if this is A STREET CAR !!!

u r crazy boosted3g !!!! haha.. good job
nice to have a sponsor

hey, do u think u can hook me up on some intercooler??

let meknow man

thanks

[KwikR6]

Daym....wanna come to my house and help me build an engine...lol

[TruHeel142]

I'm speechless man, thats insane. 10 seconds.........I'm not gonna give you much of a choice on this one, I demand pictures, timeslips, dyno's, and please please please...videos of u running the quarter. Major props, thats amazing! In a year or so, when I start thinking turbo, I'm keeping in touch with ya dude!

:bow: :bow: :bow:

[97CivicFerio]

Boosted3g, bro, buddy, come on with your lazy ass and get those pics up! ;)

J/K about the lazy ass comment, but we are dying to see your baby!!! :yes:

[Boosted3g]

im trying man. Every time i fix something there is something else that happens the following day. I cant boost over 6 psi right now and i cant figure out why. i was in the middle of a dyno pull and the shit just stopped boosting high. It went down to its base setting of 6 psi. I even drove around with no line going to the wastegate and can only get 10 psi out of it. I have a major leak somewhere.

[KwikR6]

Oh...that sucks then...I hope you can get everything working fine..then the pics and such...I understand.

[97CivicFerio]

Damn dude, I hope you get tha leak fixed soon! Let us know what it was! Peace!:)

[Boosted3g]

I need the gearing with the trap speeds i will be obtaining. Last year on an all but stock bottomm end i was coming through the traps at 127 mph at 8K with 24.5 inch slicks. I really dont want to rev the motor over 8500.