cam seals

[IALuder]

Anyone changed their cam seals before? Any write ups or tips?

[ebpda9]

i wanted to, but i ended up replacing the engine

[IALuder]

lol nice.

[ChrisCantSkate]

i poped my old ones out, buti had the motor aprt, dosnt look hard, but then again, i never put that one back together and got it running again

[IALuder]

hmmmm.

[pdiggitydogg]

You only have one cam seal - its the plug on the left side, front
(If you mean oil seals, theyre on the right, at the cam gears)

For the cam seal, just pop off the valve cover, remove the 1 cam cap holding it down, remove the seal, replace seal and cap (check your tq), put the valve cover back on.
Easy :)

[ebpda9]

Originally posted by pdiggitydogg
You only have one cam seal

i could have sworn that is a cam cap and the cam seal is at the cam sprokets

[pdiggitydogg]

Ive heard cap and seal used interchangeably

Which ones Ben?

[C's 94 InTeGrA]

Same i thought it was called the cam seal too

[IALuder]

http://www.preludeonline.com/showthread.php?t=118674

i found one hell of a write up.

[pdiggitydogg]

must be logged in for access

[IALuder]

if you want ill copy paste the tech article. it was a right up.

but heres a pic of what i was talkng about:

http://www.preludeonline.com/images/FAQ/GeneralFAQ/STR_Cam_Seal/cam_seal10.jpg