well im stumped.

[IALuder]

I need some help, i get no pressure, and allready bled all 4 calipers.

i let the resevoir on my master cylinder get to low.

[pdiggitydogg]

Do you think it got to the point were it was so low that it sucked air into the system?
If it did, youre going to have a hell of a time bleeding it - its going to take forever...

[Racing Rice]

When you bleed the system you have to make sure you have ALL of the air out of them lines. Its best to find a buddy and one pump while one bleeds. Make sure you keep fluid in the reservoir at all times. Also we always start at the wheel furthest from the MC. Thats the way we've always done it, and the way we were told to do it.

On another note, what do you mean you let the Master Cylinder get to low? Does the fluid disapper on its own or were you bleeding it when it got to low?

If it gets to low on its own, you may have a small leak somewhere. You maybe getting air in from there, or losing fluid from there. You should find it and fit it ASAP.

[IALuder]

damn. time for new brake lines. possibly a new MC.

[Racing Rice]

Could just be leaking around a fitting. Just look around and see if you kind find anything that may look like its leaking brake fluid.

[ebpda9]

just take out all the bleeders and pour the brake fluid into the cup and wait for it to come out. when you start getting lots on a wheel just put the bleeder screw. seems to work a lot better for me. also look for bad paint if you wanna find the leaks.

[IALuder]

hmm, ill try anything once.