Removing Front/Rear Bumper?

[sideshow775]

hey just wondering how I would remove the front and rear bumper on my 92 hb?

[soundspeed]

I know for the front you have to pop the hood and remove those 5 or 6 screws that hold down that metal plate at the front. (they may be seized) then there is a screw that you remove from each wheel well It'll be right at the corner of the bumper where it meets the fender, and then I belive it's two bolts that you remove from underneath towards the middle. As for the rear, I'm not sure. Pdigg may have a pic on how to do this.

[thermal]

That shit is easy man. Start taking it off. You'll see where the bolts are. If you still have your front mud guard, then it will have to come off as well....

[4drmadness]

that is one thing about the hondas..If you just get into or look at it you can see how it comes apart. Normally only like 7-10 bolts/screws that hold it.

the rear is like the front w/ the screws across the top then 1 screw in each fenderwell and 2-3 underneath.

Hope it went well for you...;)