HowTo: Rapid Blinkers

[BrandonClaps]

Well I don't like em personally, but i know people want to do this so this i whatcha do.

Step 1. Go to the fuse box and remove the flasher:

http://www.jdmfan.com/technical/cosmetic/rapidflasher/flasher.jpg
http://www.jdmfan.com/technical/cosmetic/rapidflasher/relay.jpg


Step 2. Open up the flasher and look for this resistor:

.http://www.jdmfan.com/technical/cosmetic/rapidflasher/resistor.jpg

Step 3. You will need to change this resistor to make your signal blink faster. The resistance is around 90K If you want to make your signal blink twice as fast as stock, then you would replace the resistor with a 45K.

The lower the resistance, the faster it will blink

[BrandonClaps]

is there a reason pictures don't work in this forum?

[thermal]

that's ok, the pics u attached are quick to load anyway......thanks for your contribution man.....:)