View Full Version : Antenna
Victorystardrop
08-23-2004, 03:58 PM
My antenna dosent go down or anything and im really not a big fan of it, are there easy ways to take it off or will it leave an ugly mark where it was?
AkimboStylee
08-23-2004, 04:38 PM
you will have a hole, and that would have to have a piece of medal welded in there and it would have to be repainted
pdiggitydogg
08-23-2004, 06:58 PM
you can get an eg block off plate for it
then just push the push the antenna down into the pillar
its what I did
Victorystardrop
08-24-2004, 10:51 AM
Since my antenna dosent move in its own, is it possible for me to push it back down? or do they not go in? I cant remember ever seeing that happen.
JDMFantasy2k
08-24-2004, 11:12 AM
when i bought my car the antenna was frozen about 1/4 of the way up (the girl i got it from lived on the ocean). So basically it was corroded.
So i picked up a new antenna from a local shop, and installed a new one. It's pretty easy just undo the plate, and then under the dash you need to look for the antenna wires, unplug it, and then floss the new one throguh. Or you could do as pdiggs said and just get a block off plate.
pdiggitydogg
08-24-2004, 11:40 AM
it'll go in...just push it down w/ some pliers about 1" at a time starting (at the base so you dont bend it)
Then, like I said, get a block off plate
vBulletin v3.5.3, Copyright ©2000-2025, Jelsoft Enterprises Ltd.