rear hub replacment

[ewaugh]

My rear hubs are shot, we've got the hubs to put on there. I got the old hub off, but the race seems to be seized to the axle. I've cleaned it with brake cleaner and sprayed WD-40 (it was all i had), and the thing ain't budging.

Any suggestions? Anybody have any experiance with this before?

[pdiggitydogg]

rear axle? This isnt on the civic, is it.

Well...the race sticking is a common problem. I found this on h-t...may be of some use
http://www.honda-tech.com/zerothread?id=644373
...sometimes the inner race stays behind. that's when you ahve to use a cut off tools cut the race half walf way through use a air hammer with chisel bit hit it in the center of the cut. and it will crack the sleeve then remove that and installl. new
exactly what he said but there is a catch. sometimes the inner race stays behind. that's when you ahve to use a cut off tools cut the race half walf way through use a air hammer with chisel bit hit it in the center of the cut. and it will crack the sleeve then remove that and install new