sp33dkitt3n
02-24-2004, 09:37 PM
PLEASE READ THOROUGHLY TO THE BOTTOM!
PARTS FROM 1999 SHOW PRELUDE TYPE SH
-AEM Big Brakes 13" front with 4 piston calipers and 12" rear- $1200 paid about $2500
-Tein suspension dual spring adjustible coilovers $600 *SOLD*
-Skunk 2 Lower tie bar- $80 paid about $180
-Skunk 2 dual mufflers, 3" mandrel bent pipes, 3" Catco Cat, 30" resonator will NOT part- $200
-Black Widow full body kit(front bumper driver side needs fiberglass repair very easy fix I
can take care of it if you like, it is currently PPG lamborghini orange)-$150 YES FULL KIT!*SOLD*
-Wings West Big Mouth kit(brand new already painted black never installed)-$800 paid $1000LOCAL BUYERS ONLY
-Carbon Fiber Turbo hood with extra clear coat- $250 paid $500LOCAL BUYERS ONLY
-Carbon Fiber "aluminum wing"- $150 paid $500
-Super Purple HELLA HID kit used just a few times-$200 paid $500*SOLD*
-Factory type SH wheels w/factory almost new tires no curbs or scrathes- $300
-Full factory interior willing to piece out or sell all together make me an offer.
-Turbonetics T3/T4 turbo kit(turbine,mani,down pipe)Greddy intercooler(biggest one they make)
Greddy BOV- all for $2500 paid around $4500
-Blitz boost controller and turbo timer- $150 paid $400*SOLD*
-Greddy catch can- $40 *SOLD*
-MSD SCI Ignition with 1 stage revlimiter, blaster coil and plug wires- $200
-Brand new factory alternator with about 3 hours no lie!- $250 paid $400
-AC Autotechnics(sp?) Intake manifold-$400 paid $500 BRAND NEW still in box.
-RC Engineering Injectors 440's- $300 & 750's-$500
-Polished factory valve cover- $150
-Hayame polished plud wire cover(almost new)-$50
-Custom(lengthened for better distribution to #4 cyclendar) fuel rail- $100
-AEM stand alone fuel management- $800 paid about $1400
-Fluidyine Radiator- $200 paid about $400(almost BRAND NEW)
-Factory OBD II ECU- make offer
All of the above mentioned parts excluding AEM fuel Management, 750 injectors and
interior- $6500... with interior $7000 FIRM!
EXTRA RANDOM PARTS
-Factory tranny with ATTS Type SH(about 50K mi)- $600
-JDM 95 typeS tranny 50K mi. no LSD- $600
-ACT 6 Puck clutch with factory flywheel(less than 500 mi)- $250
if you buy one/both of the trannys I'll add on the clutch for 200 more.
-Complete 95 JDM H22A with 30K mi. needs new rings and needs to be honed- $500
-95 H22A1 Closed Deck BLOCK, complete but needs to be assembled with the following:
-Guerilla sleeved
-bored to 88 mm
-Wiseco Pistons
-8:5 compr.
-Crower rods
-Honda bearings
-Honda crank
-ARP headstuds
-Balanced crank, rods, and pistons.
HEAD(assembled):
-ported
-.5 mm oversized valves
-Crower dual valve springs
-Titanium retainers
-Honda cams & sprockets
-Head and Block together $2000
-CIVIC EG race ready body:
-Race legal(road and drag specs) 10 point roll cage.
-Perfect prepped paint ready body inside and out.
-Wings West Big Mouth Body kit
-interior includes dash, guage cluster, windows(need to be installed) doors hatch(all factory)
-Carbon Fiber hood(brand new)
-Set of 2 Advan 15" racing wheels with slicks
-rolls...complete with stock suspension and some blacks.
no carpet or seats it is NOT tube frame.
$2500
--------------------------------------------------------------
All these prices are firm however some of the items I listed to make me an offer but please be reasonable otherwise
I wont even answer you.
The prelude stuff is all from a show prelude that is now retired some of you might have seen it, won best engine
at Import Motion Seattle 03' (but the engine is now taken apart and rebuilt)
Anyhow we no longer have the time nor money for this project with a few new projects and starting schoolso we are now parting out the vehicle and returning it to factory condition and selling everything off just to let you know all these parts are LEGIT not stolen in fact all bought from local shops mainly speedline.
The parts on this are all either brand new, or fairly new with limited use as this car was not a daily driver and
spent most of the time on a dyno or in a shop or in a garage being worked on alot trying to achieve high HP #'s.
please email me if you have any questions at all on any of the parts!
ALL PRICES ARE FIRM! You must pull/disassemble/assemble the parts yourself if you cant then you
must pay extra....also if any of these items need to be shipped you must pay shipping.
Prefer to do business with northwest locals but will diseassemble and ship with extra $ for labor and shipping.
EMAIL ME: si_racer_chick@hotmail.com
AIM:SP33DKITT3N
SERIOUS INQUIRIES ONLY!
If you live in the are I will be happy to arrange a visit so you may see the cars yourself and inspect the parts you wish to buy!!
http://images.cardomain.com/member_images/6/web/390000-390999/390578_9_full.jpg
http://images.cardomain.com/member_images/6/web/390000-390999/390578_8_full.jpg
http://images.cardomain.com/member_images/6/web/390000-390999/390578_10_full.jpg
PARTS FROM 1999 SHOW PRELUDE TYPE SH
-AEM Big Brakes 13" front with 4 piston calipers and 12" rear- $1200 paid about $2500
-Tein suspension dual spring adjustible coilovers $600 *SOLD*
-Skunk 2 Lower tie bar- $80 paid about $180
-Skunk 2 dual mufflers, 3" mandrel bent pipes, 3" Catco Cat, 30" resonator will NOT part- $200
-Black Widow full body kit(front bumper driver side needs fiberglass repair very easy fix I
can take care of it if you like, it is currently PPG lamborghini orange)-$150 YES FULL KIT!*SOLD*
-Wings West Big Mouth kit(brand new already painted black never installed)-$800 paid $1000LOCAL BUYERS ONLY
-Carbon Fiber Turbo hood with extra clear coat- $250 paid $500LOCAL BUYERS ONLY
-Carbon Fiber "aluminum wing"- $150 paid $500
-Super Purple HELLA HID kit used just a few times-$200 paid $500*SOLD*
-Factory type SH wheels w/factory almost new tires no curbs or scrathes- $300
-Full factory interior willing to piece out or sell all together make me an offer.
-Turbonetics T3/T4 turbo kit(turbine,mani,down pipe)Greddy intercooler(biggest one they make)
Greddy BOV- all for $2500 paid around $4500
-Blitz boost controller and turbo timer- $150 paid $400*SOLD*
-Greddy catch can- $40 *SOLD*
-MSD SCI Ignition with 1 stage revlimiter, blaster coil and plug wires- $200
-Brand new factory alternator with about 3 hours no lie!- $250 paid $400
-AC Autotechnics(sp?) Intake manifold-$400 paid $500 BRAND NEW still in box.
-RC Engineering Injectors 440's- $300 & 750's-$500
-Polished factory valve cover- $150
-Hayame polished plud wire cover(almost new)-$50
-Custom(lengthened for better distribution to #4 cyclendar) fuel rail- $100
-AEM stand alone fuel management- $800 paid about $1400
-Fluidyine Radiator- $200 paid about $400(almost BRAND NEW)
-Factory OBD II ECU- make offer
All of the above mentioned parts excluding AEM fuel Management, 750 injectors and
interior- $6500... with interior $7000 FIRM!
EXTRA RANDOM PARTS
-Factory tranny with ATTS Type SH(about 50K mi)- $600
-JDM 95 typeS tranny 50K mi. no LSD- $600
-ACT 6 Puck clutch with factory flywheel(less than 500 mi)- $250
if you buy one/both of the trannys I'll add on the clutch for 200 more.
-Complete 95 JDM H22A with 30K mi. needs new rings and needs to be honed- $500
-95 H22A1 Closed Deck BLOCK, complete but needs to be assembled with the following:
-Guerilla sleeved
-bored to 88 mm
-Wiseco Pistons
-8:5 compr.
-Crower rods
-Honda bearings
-Honda crank
-ARP headstuds
-Balanced crank, rods, and pistons.
HEAD(assembled):
-ported
-.5 mm oversized valves
-Crower dual valve springs
-Titanium retainers
-Honda cams & sprockets
-Head and Block together $2000
-CIVIC EG race ready body:
-Race legal(road and drag specs) 10 point roll cage.
-Perfect prepped paint ready body inside and out.
-Wings West Big Mouth Body kit
-interior includes dash, guage cluster, windows(need to be installed) doors hatch(all factory)
-Carbon Fiber hood(brand new)
-Set of 2 Advan 15" racing wheels with slicks
-rolls...complete with stock suspension and some blacks.
no carpet or seats it is NOT tube frame.
$2500
--------------------------------------------------------------
All these prices are firm however some of the items I listed to make me an offer but please be reasonable otherwise
I wont even answer you.
The prelude stuff is all from a show prelude that is now retired some of you might have seen it, won best engine
at Import Motion Seattle 03' (but the engine is now taken apart and rebuilt)
Anyhow we no longer have the time nor money for this project with a few new projects and starting schoolso we are now parting out the vehicle and returning it to factory condition and selling everything off just to let you know all these parts are LEGIT not stolen in fact all bought from local shops mainly speedline.
The parts on this are all either brand new, or fairly new with limited use as this car was not a daily driver and
spent most of the time on a dyno or in a shop or in a garage being worked on alot trying to achieve high HP #'s.
please email me if you have any questions at all on any of the parts!
ALL PRICES ARE FIRM! You must pull/disassemble/assemble the parts yourself if you cant then you
must pay extra....also if any of these items need to be shipped you must pay shipping.
Prefer to do business with northwest locals but will diseassemble and ship with extra $ for labor and shipping.
EMAIL ME: si_racer_chick@hotmail.com
AIM:SP33DKITT3N
SERIOUS INQUIRIES ONLY!
If you live in the are I will be happy to arrange a visit so you may see the cars yourself and inspect the parts you wish to buy!!
http://images.cardomain.com/member_images/6/web/390000-390999/390578_9_full.jpg
http://images.cardomain.com/member_images/6/web/390000-390999/390578_8_full.jpg
http://images.cardomain.com/member_images/6/web/390000-390999/390578_10_full.jpg