Where to find rear disc swap parts?...

[blind34_1]

Okay guys, I'm having a helluva time trying to find these parts:

90-93 Integra Rear Trailing Arms (with everything attached: rotor, caliper, ebrake Cables...)
or 90-91 CRX Rear Trailing Arms (with same...)

I've looked on ebay, and i've checked my junkyards. So i've got those covered. If anyone knows somebody selling these parts, or knows of a site that I havent run across yet (yes I am watching car-part.com also) please let me know.

(and i've tried Fast Brakes Inc. nice stuff, but too rich for my blood, looking to pay around $150-$200 for the raw parts)

[ebpda9]

good luck finding those for under 300. i almost had a deal with those and i was able to sell them for under 300 shipped but i kinda got the shaft on it. :mad:

[pdiggitydogg]

once in a while you can find them on ebay for decent prices (before shipping...thats where they get a little extra $)

[blind34_1]

Yeah, I'm looking to redo the entire braking system, and the rear disc swap is kinda a key component. Since the civic is garaged now, i have all the time in the world. ill keep looking...

[ebpda9]

let me see what i can scrounge for you when i go pick mine up tomorrow. i picked it mine up for 250 the entire rear suspension.

[AzCivic]

try www.sohfast.com

[MAXed Out]

u should be able to find them in a junk yard bro.

[blind34_1]

my junkyards suck. the only tegs we have are older than the year i need. and the one that would've worked, my friend got to first!

i talked to sohfast.com, and they have them...for 150 a side! not a great price, but the only one I have so far. might just have to bend over and take it....

they also have quite the collection of master cylinders and what not. what is the difference between a "non-ABS 1" master cylinder w/ booster and reservoir" and a "non-ABS 15/16" master cylinder w/ booster and reservoir"?? The years differ, but is it possible to interchange parts like that? all it needs is vacuum for the booster and it should work, provided i use the correct calipers and hardware, right? somebody help me!

[pdiggitydogg]

Im not sure on the mc because I know i dont need it on the ex...but there is a thread on honda-tech called "x brakes on y car"...search for that, as well as "be all end all" which is the main part of the title of that same thread (get it?)
it will tell you everything you need to know

good luck...

edit**i believe the da teg parts will fit your car
http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&category=33564&item=2442210891

[nonovurbizniz]

As far as the masters are concerned...

The 15/16ths is obviously smaller (1/16th of an inch smaller)... but it bolts DIRECTLY up... no line bending (only to IT'S booster NOT the stock civic one.)... I have this master and it's fine...

The 1" requires you to bend the stock lines... it's not that bad but I'll take bolt up anyday...

Also there is a 15/16ths that will bolt to your booster it's in the thread on h-t that pdig mentioned...

also don't forget the proportioning valve....

[blind34_1]

thanks guys...and pdigg, that ebay auction was exactly what i was looking for, i dont know how i didnt see it before. thank you!, now I just need to get the proper mc, bb, and prop valve. yay!

[ebpda9]

Originally posted by AzCivic
try www.sohfast.com i remeber back in the PH days they were in troble for selling parts off stolen cars.

[AzCivic]

I've never heard of them having anything to do with stolen junk!?!?!? all i know is that they have good products and VERY good customer service.

[blind34_1]

they seem like a reputable company, but yeah you know how can you be sure? oh well. I'm gonna go with them, but first im going to snipe the auction at the last few minutes and see if i can get the better deal.

[nonovurbizniz]

You should either check to see what condition the RTA bushings are in or be prepared to buy some aftermarket ones...

Unfortunately stock replacements of the mugen one's are really the only GOOD options...

prothane and ES make them too but they're solid which is sortof in-appropriate for that bushing... as it move more dynamically than most bushings.

[pdiggitydogg]

are you still looking for these discs? 'Cause Im bored today and found some more on egay

http://search.ebay.com/search/search.dll?query=crx+rear+disc&ht=1&sosortproperty=1&from=R10&BasicSearch=

[AzCivic]

damn they're going for that much! i should sell mine.

[pdiggitydogg]

youve got DA parts??

[AzCivic]

oh, no i was just talking about my stock rear disc's.

[nonovurbizniz]

Originally posted by pdiggitydogg
youve got DA parts??

I do....

I have 93 RS rear disk on mine...

I may be picking up a GSR next week so to the poster...

I may be willing to sell you my set up as I think it causes camber issues on my gen...

I'll let you know if I get the one of the GSR's I'm looking at.

[pdiggitydogg]

oh no...i need dc parts...for the 97
I was just kinda surprised to see az had parts sittin around
Im bidding on an ebay setup right now...just needs a few parts
good price

[blind34_1]

id be interested in your setup nonovurbizniz, if your selling. i'm still looking around, just got started on removing the old trailing arms yesterday, fun fun.

those egay auctions are awesome, thank you much, although im not sure the siR stuff bolts directly up...i'll have to check. thats an awesome deal on the other one though, he's selling EVERYTHING i need for my complete conversion, almost. thank you very much!

[nonovurbizniz]

Mine's on my car...

I don't think I'll be taking them off... unless I get a car I may be bidding on in the next couple of days...

I'll let you know.

[blind34_1]

well i now own the high bid on exactly what i need, auctions over soon, so i may not need them. i let you know.

[pdiggitydogg]

joo can doo eet
:thumbsup:

[blind34_1]

man i got screwed...and so did everbody else. it was getting down to the wire, about 45 minutes left and we had upped the ante to $200, then the douche bag cancels the auction! wtf? why would you have an auction for something you didnt want to sell? the reason said it was 'no longer available'. what an idiot, if your going to sell it to someone outright, dont put it on ebay!! grr......

anyway, i'm still looking so if anyone has any other ideas or offers , im open (i'm still watching the other two auctions, however with a jaded outlook on ebay...)

[blind34_1]

Okay, nevermind. I've finally found a much better source than anything else. You know those sites that are basically parts-request places? well, If your patient they work great. I went to UNAP (U Need A Part) and filled out their info, before I know it i've got about five or six salvage yards emailing me saying they have my part. I ended up going with one for 222.50 shipped. (of course right after i agreed to go with that one, i get another offer of 200 shipped...oh well.) I'm just happy I finally found a decent source besides eGay.