PDA

View Full Version : Mods...


VR4_Craver
10-15-2003, 08:14 PM
I was wondering what most people have done to their cars and what they have planned. That way i can kinda of get an idea of what people are doing. Mine list is kinda short but should be nice gains.

1.Nitrous. Why? heh nitrous is cool.
2.New intake.
3.cam gears.
4. start saving for the turbo.:yes:

pdiggitydogg
10-15-2003, 09:25 PM
Im in the mood for this right now...so:

1) Del Sol seats (I found a pimp deal on some black/reds (everyone stay away from jdmcivic's classifieds...theyre mine!)
2)Damn tires in the spring (yoko parada spec II's)

long way down the road
3) B18b + b16a tranny
4) OBD1 Conversion
5) Boost ( :dollar: )
6) Hondata system (or just SAFC...depends on what I wanna do)
7) CF hood
8) Rear disc conversion

Thats all I want right now...expensive list...but thats what I dream of

Shaved &/or Laid
10-15-2003, 09:35 PM
WORD MAD TIGHT TYPE R

1) wheels, kit, rice
2) groundcontrols/KYB's
3) Carbonfiber hood
4) Red and black racing seats (ha ha mine are lower than sol seats) and upholstered my doors black.
5) most importantly b16a2 swap (j-spec) that will be done in 2 days.

MAXed Out
10-18-2003, 12:22 PM
I did a whole bunch of shit on mine rims/tires, skunk 2 coilovers, AEM cai, tanabe exhaust, cornerbumpre/tail lights, changed colors(EBP) system, etc.

nonovurbizniz
10-18-2003, 04:04 PM
I've tried to post this 3 times already...

Have:
Iceman Intake
Chikara Header
Catco Cat
Brospeed Exhaust
ES Master Kit
ES Motor Mount Inserts
B&M Short Throw
Konig Helium Wheels
Mugen Lugs y0!
MSD Modifier Cap
MSD Coil
Taylor Pro wires (gunna go back to stock soon I think)
Rear Disk Conversion
Upgraded Master/Booster and proper prop. Valve.
All 4 Power Stop Rotors
PCV Oil Seperator ;)
JDM headlights (Will have the corners eventually just ordered them for a 4door by accident...)

Have to install:
Mugen RTA bushings
Bunch of stock crap
DIY Ground Wire

As far as future plans...

If I ever get enough money for a swap I'll just buy a wrecked type R or GSR and swap out the:
Engine
Seats
Sway Bars
Brakes (fronts if it's a GSR or all 4 if it's a typeR)

Bling Bling stuff I'll probobly never get but would if I had an open-ended budget...

CF Hood (painted top and bottom)
Teins
Mugen Brakes
Mugen wheels
Bah... I could go on forever on the dream list...

Maybe it'll work this time.:mad:

pbateson
10-18-2003, 11:24 PM
I do little mods for car. Because I don't used as much, nor don't want to spend more money for alot mods. I love traveling on plane because it more fun than driving the car.

OEM Spoiler

Greddy Lip Spoiler

Fog Lights

Paint the bumper and side

Removed the orange lense on tailights

Fixing the front dash speaker

Rims

Sunroof Visor

Clear Bumper and corner light

That all.

Duckydos
10-18-2003, 11:29 PM
Check the sig for current mods. What I have planned in the future? Well, paintjob and then sell it (or keep it as a project car) :D My car is too much like me, slow and fat.

sohc_vtec 2NR
10-19-2003, 01:09 AM
so far i only got intake/exhaust/short shifter on the car so i'm savin' up for...
1) 96-00 Greddy Turbo Kit and turbo timer

2) Tein coilovers, camber kit, f/r strut bars..decidin' on if i should get f/r swaybars...

3)clutch/lightened flywheel

4)whatever i'm in the mood for...cf hood, type r headlights, etc..

thermal
10-19-2003, 10:00 AM
99civicEX-turbo @ 10psi
This is my daily driver. 3 more mods to go and I'm done. I just want to keep it as reliable and as fun as possible.
-skunk2 front camber kit (ordered)
-high flow cat (on hand)
-secondary O2 simulator (damn OBD2!:D)

96integraGSR-JDM B18C (ITR)
This is my project car. It already has some major mods in it: http://www.hstuners.com/forums/showthread.php?s=&postid=191070#post191070
I plan to add/upgrade to:
-Tein fully adjustable/race coilovers
-T3T04e custom turbo set-up with a minimum of Hondata
-Recaro or momo seats
-LCD/DVD/CD
-lots of interior stuff gots to get done

ebpda9
10-19-2003, 10:16 AM
92 accord LX
-koni Yellows
-ground control Coilovers
-Neuspeed Upper front strut bars
-Some off the wall brand for Rear upper strut bar and rear lower tie bar
-Suspension techniques rear sway bar
-Sprint extreme camber kit
-AEM CAI with BPV
-Thermal R&D Classic Exhaust
-MSD 6A Ignition Amplifier wioth blaster 3 coil
-Venom High Flo Performance Inhectors (not yet installed)
-Perma-Cool Tranny Cooler
-B&M Trick Shift tranny fluid (not really a mod but makes the tranny shift better)
-Tenzo-R SHU-4 Rims with hankook ventus HRII tires
-Energy Suspension Front bushings
-"Mandatory" JSP Fiberglass touring spoiler
-94 Accord EX front lip (still gotta mold it to fit my bumper)

Shot 2 Hel
10-20-2003, 05:09 PM
hmmmmmm
Pioneer DEH-P3500
Kenwood 5 1/2" rear deck speakers

and im not doing anything else to this car

AzCivic
10-20-2003, 06:47 PM
Aem cai
Dc sports 4-2-1-header
Apexi WS Exh.
2 1/4" drop w/ Progress springs
KYB AGX's
Dc sports Short shifter
10lb Lightened Flywheel
test pipe
Rota C8's w/ yoko parada spec 2's

Next step: D16Y8 tranny/ACT clutch/ACT prolite FW
Quaife LSD/SRR 4.7FD

Then: Upgraded internals or resleeved/upgraded internals
BOOST!(not sure on the setup)
cam/vavletrain/raise revlimit to 8200
Koni yellows
rear sway bar
and other stuff i'm sure

94_AcCoRd_EX
10-20-2003, 08:58 PM
AEM CAI
AEM pulleys
DC ceramic header
ACT clutch
Denso plugs
Magnecor wires
True short shifter
Tein SS coilovers
Neuspeed upper front strut bar
Probably some other junk

Up next: Exhaust because mine has big rust holes :rolleyes: