PDA

View Full Version : Can someone help me out with my new project


DSMforLIFE
09-11-2003, 09:09 PM
OK...I just bought a 1992 Honda Civic VX for $200 from some old guy out on a farm near where I live. I normally drive a 1990 Mitsubishi Eclipse GSX that is pretty much all go and no show( for those of you that dont know the GSX is turrbo charged and all wheel drive...aka very very fast...ps last night I ran an 11.34). What I want is for this car to be very showy and a little ricey, but i still want it to move. The last part is where my troubles are coming from...I cant find any parts for the engine. Can someone please help me find some parts and no i dont want to spend three grand and drop a B18 in it, I want this to be my show car.

pdiggitydogg
09-11-2003, 09:25 PM
Good time on your dsm...those wedges of cheese are fast, indeed.

only way youre going to get a vx to move is to boost it (if you dont want to swap). Even na the d15z1 isnt anything of an engine...(see below)

F*** Rice...dont even bring that up...even if you want a Show car... I cant advise anything because I dont know show stuff...personally I really dislike it. Hang around and others will help.


Specs D15Z1 -
Displacement (cc): 1493
Power (bhp@rpm): 92@5500
Torque (ft/lbs@rpm): 97@4500
Compression Ratio: 9.3:1
Bore (mm): 75
Stroke (mm): 84.5
Cam: sohc
OBD: 1

AzCivic
09-11-2003, 10:27 PM
get a cheap/used D16z6 and boost it.

Wren57
09-11-2003, 10:53 PM
d16 can be had for $150 around here, boost for about 1500... i'd rather just get a b16 for around 2000 and install it myself...

AzCivic
09-11-2003, 11:08 PM
then you'll have spent more to go slower. :confused:

and dont give me that "its a better platform" BS neither!

Wren57
09-11-2003, 11:51 PM
yeah, I just like the idea of having something that is put together that is meant to run the way it is... I would rather have 160NA hp than 170turbo HP anyday, I just like the linear power curve... don't get me wrong, I would love to turbo the Z and plan on it years down the road, but thats just because NA has limits on streetable power...

pdiggitydogg
09-12-2003, 09:36 AM
the b16 would be = to or > 140hp to the wheels
turbo d16 would be = to or < 160 to the wheels done correctly at a small amount of boost

AzCivic
09-12-2003, 01:59 PM
keyword being "small" amount of boost ,you can get like 200hp at the wheels on a stock d series engine with no problems at all on a little more boost.

i'm not even going to mention the difference in torque ratings.

pdiggitydogg
09-12-2003, 10:18 PM
that was my point

AzCivic
09-13-2003, 01:28 AM
yeah i know, I was just making sure everyone else knew that the limit of a turbo dseries engine isnt 160hp.

thermal
09-13-2003, 05:11 AM
Welcome DSMforLIFE! Anyway, since you said that you do not want a swap, the only way that you can add more HP to that tiny motor is to slap a some sort of Force Induction or Nitrous. If not, sell me that VX. I'll give you $300 for it;)

nonovurbizniz
09-13-2003, 01:29 PM
isn't that the d15 that has roller rockers???

if so that thing can be made FAST... it just takes LOTS of work.

you can also do a "mini-me" head swap...

basically you swap the d16z6 head on to the d15 block... the d15 rods are a little weaker so it won't support as much hp in the long run... but it'll give you more power...

I'd suggest looking over on honda-tech and doing LOTS of searching before asking any questions...

DSMforLIFE
09-13-2003, 11:10 PM
Thanks... you guys have been a big help... If it wouldnt be too much truoble could someone please tell me what i have and what I need to improve on to pull a turbo d16 swap,(ie. fuel pump, trans, afc...). thanks alot.

pdiggitydogg
09-13-2003, 11:30 PM
your engine specs are in my 1st post

you could just swap a d16z6 head onto your block, I believe the vx already has vtec so it shouldnt be that complicated...someone else wanna help me out w/ a mini-me help...ive never looked into it

Shaved &/or Laid
09-14-2003, 12:07 PM
mini me = torque

sicones
09-15-2003, 11:16 AM
Whats the most power a stock d16y8 can handle whether its turbo or nitrous??

Shaved &/or Laid
09-19-2003, 06:58 PM
there is no "t3h ult1m0r MaXx0rZ poWA" rating. Its all tuning. Talk to AzCivic hes smarter than you or me both will ever be.

cashizslick
09-23-2003, 11:02 AM
Originally posted by AzCivic
get a cheap/used D16z6 and boost it.

Have I got a Deal For You!!! - $300

Put the Apexi turbo kit on it, and throw some 15's on your car with 45 series tires. Your light, torquey car will own all!