Headlight Strobe Install question

[civicsystm]

i just bought headlight strobes for my civic, i got a 98 LX where the hell could i drill a hole to place the strobe in the headlights?

[sohc_vtec 2NR]

whereever you want...
i drilled mine on the inside "side" of the headlights...right between the first and second reflector..

i suggest you open up your headlights and drill from the inside, that way you won't have little plastic fuzz on the inside of your headlights AND you won't risk damaging the reflector...

if you want i can take a picture to show you

[accord98lx]

uh...what is a headlight strobe?

[DavidH]

i *think* its just a strobe light that gets mounted inside the headlight housing. Just be careful to seal up the hole well, dont want any fogging....

[Mischief(LTS)]

yea.. use the clear silicone sealant, and LOTS of it. this will ensure proper seal :PP

[civicsystm]

tell me how the heck to take out the headlight, i took out the top two bolts and it wouldnt budge, and a picture would help thanks

[DavidH]

for the 98 LX im about 90% sure the bumper has to come off before the headlights will come out.

[sohc_vtec 2NR]

there is another bolt on the outer side of the headlight (turn signal side). you'll have to pull part of the fenderwell plastic to get to it. i believe there's only 3 bolts per headlight, but i could be wrong...i'll take the picture tomorrow for you

and i didn't have to take the front bumper out..

[DavidH]

i was wrong then =P isn't a first lol

[WhiteSleeper]

You're gonna have to take the bumper off, there's a bolt on the outside and one in the front.

[sohc_vtec 2NR]

i didn't have to...:yes: