Pics of my 95 Prelude Vtec TURBO (lotsa pics!)

[KiDkUtZ]

hey...this is my first post on this board...let me introduce my ride...

1995 Honda Prelude VTEC Turbocharged

http://www.thedigitalfridge.com/UserFilesa/2001/07/23/00019737/y_80751460.jpg

http://www.thedigitalfridge.com/UserFilesa/2001/07/23/00019737/y_80751499.jpg

http://www.thedigitalfridge.com/UserFilesa/2001/07/23/00019737/y_80751500.jpg

http://www.thedigitalfridge.com/UserFilesa/2001/07/23/00019737/y_80751464.jpg

http://www.thedigitalfridge.com/UserFilesa/2001/07/23/00019737/y_80751463.jpg

http://www.thedigitalfridge.com/UserFilesa/2001/07/23/00019737/y_80751501.jpg

http://www.thedigitalfridge.com/UserFilesa/2001/07/03/00019737/y_79031373.JPG

http://www.thedigitalfridge.com/UserFilesa/2001/07/03/00019737/y_79031943.JPG

http://www.thedigitalfridge.com/UserFilesa/2001/07/23/00019737/y_80751461.jpg

[ChrisCantSkate]

nice car

[grl_racer]

very nice....

[Big James]

Sweet. More under hood pics would be appreciated.

Tell me about the turbo setup.

[2000Pimpinex]

Very nice setup, I like.

[KiDkUtZ]

my setup: (i just cut and paste it from my hondaprelude.com setup
--> http://216.183.103.77/setups/setupsdsply.asp?id=7662

-2.2L VTEC
-Turbonetics T3/T4 Ceramic Ball-Bearing Turbocharger
-Spearco Intercooler
-Tial 35mm External Wastegate
-Greddy Type S Blow-Off Valve
-Fmax Turbo Manifold
-Custom Stainless Steel Exhaust
-Skunk2 Adjustable Cam Gears
-RC Engineering 550cc Fuel Injectors
-MSD Inline Fuel Pump
-Paxton Boost Dependent Fuel Pressure Regulator
-B&M Fuel Pressure Gauge
-MSD 6a Ignition
-MSD Blaster SS Coil
-MSD 8.5mm Wires
-Missing Link MAP Bypass
-Energy Suspensions Urethane Engine Mounts
-K&N Air Filter
-K&N Crankcase Breather Filter
-DEI Thermo-Wrap
-Interstate Battery (Relocated to trunk)
-Quaife ATB Differential
-ACT Xtreme Pressure Plate
-ACT 6 Puck Race Disc
-13lbs lightened Flywheel
-DC Sports Short Shift Adapter
-OEM Air Conditioning (Still Got It!!!)
-Koni Height and Pressure Adjustable Shocks (Koni Yellows) - Modified for more height adjustability
-Neuspeed Race Springs
-17" Enkei RS-6 on 215/40-17 Falken ZE-502
-15" Primax Rims on Mickey Thompson ET Drag Slicks
-15" Honda OEM Steals on Toyo Observe X-10 Walnut Compound Winter Tires (YES! It's daily driven year round!)
-Azure Blue-Green Pearl Paint
-Wings West RS Urethane Front Lip
-JDM One-Piece Headlights (Black Housing)
-APC Clear Bumper Lenses
-APC Euro-Clear Rear Side Markers
-APC Clear Side Markers
-Custom Taillights Half Red/Clear (Custom painted by me!)
-PIAA Platinum Superwhite H4's for Low-Beams
-PIAA Plasma Ion Yellow H1's for High-Beams
-Polarg lighting for everything else
-3M Invisible Bra
-EFI System's Programmable Management Unit (PMS)
-HKS Electronic Valve Controller 3 (EVC3)
-Defi Boost & Timer Heads-Up Display
-Auto Meter Pro Shiftlite w/ Blue Lens and Cap
-Valentine One Radar Detector
-Lidatek Laser Echo (Laser Jammer)
-Compustar 2000AS 2-Way Paging Alarm

[2ndGenTeg]

One word: damn.

[Accord Man]

Very impressive!!

its nice to see you went more with GO than Show..
But with that much GO, its kind of a show anyways..


Once again, nice job!:cool:

[MrCLoWnY]

I seen that picture somewhere. hehe how fast?

[94_AcCoRd_EX]

Nice ride! What does it run???

[Big James]

Nice. The turbo setup is very close to what I am going with. I already have the Turbonetics T3/T4 and the Spearco FMIC. I am getting the Tial 35mm, the RC 550's, and more than likely the FMAX mani. However, I am going HKS on the BOV. Looks like a great setup man. Good Job.

[AcCoRd97Lx]

ooh that intercooler pic is just tight!! nice ride...any times?