Sway Bar Link.

[Rob]

Got a question...I have Eibach sway bars on factory links which for some reason the one on the passenger front side keeps breaking if I hit a bump too hard too fast...does anyone out there know of anybody that makes aftermarket links that would support aftermarket sway bars??

[ebpda9]

try summit racing or i can take a look for you in a day or 2. is your chassis alright ? do u have any caster issues ?

[Rob]

Originally posted by hondaman-iac
try summit racing or i can take a look for you in a day or 2. is your chassis alright ? do u have any caster issues ?
Thanks, I'll try Summit...but caster issues, I have no clue???

[ChrisCantSkate]

maybe weld? i know the neuspeed 29mm bars for my car need to be welded on so they dont rip the frame(seriosuly happend to a friend)

[Racing Rice]

Are you sure your cars not to low? They maybe putting to much stress on the endlinks since your swaybar is so stiff.. My Skunk2 sway says not to install on a car lowered more then 1.5 inches or something like that.

[ebpda9]

eibach says the same thing, don't use them for cars lowered more than 2" and i guess his car is more than 2" lower.

[Rob]

Originally posted by hondaman-iac
eibach says the same thing, don't use them for cars lowered more than 2" and i guess his car is more than 2" lower.
really? shit, that must be it....2 1/4 drop here......:banghead:

[ebpda9]

Originally posted by AccordinStyle
really? shit, that must be it....2 1/4 drop here......:banghead:

i really haven't seen any swaybars that will go with a drop of more than 2". when i fin some i will let you know

[Rob]

thanks!