PDA

View Full Version : One Piece Headlights.

Rob
12-17-2002, 09:29 PM
O.k....this might be in the wrong forum and it's gonna sound really, really stupid but one of my turn signal bulbs burnt out and I have one piece headlights....is there any way that I can change the bulb without taking off my bumper??

I can get to the back of the bulb by peeling back the wheel well cover but I can't get to the bulb? :crazy: :doh:

Any advice would be great.......
ebpda9
12-19-2002, 03:03 PM
get a hammer and break that glass. it will make it easy for you bubu :loco: ;)
Rob
12-19-2002, 05:02 PM
Originally posted by hondaman-iac
get a hammer and break that glass. it will make it easy for you bubu :loco: ;)
:eek: nooooooooooooooooooooooooooooooooooooooooo! :loco:
ChrisCantSkate
12-19-2002, 05:15 PM
if you can get to the bulb... it should twist out.
94_AcCoRd_EX
12-19-2002, 05:18 PM
Originally posted by AccordinStyle

I can get to the back of the bulb by peeling back the wheel well cover but I can't get to the bulb? :crazy: :doh:

Any advice would be great.......

I'm not sure what you're saying here. You can reach the back of the bulb (where the harness connects)? If so, at least on my car, you just rotate it 90 degrees and the bulb comes out the back.
Rob
12-19-2002, 06:03 PM
Originally posted by 94_AcCoRd_EX
I'm not sure what you're saying here. You can reach the back of the bulb (where the harness connects)? If so, at least on my car, you just rotate it 90 degrees and the bulb comes out the back.
I don't know....I had my hand on where the harness connects and tried to twist it but it wouldn't move....

maybe I have to push then twist??
94_AcCoRd_EX
12-19-2002, 06:19 PM
Originally posted by AccordinStyle
I don't know....I had my hand on where the harness connects and tried to twist it but it wouldn't move....

maybe I have to push then twist??

Mine can be VERY hard to turn sometimes (for my headlights). I don't know if Honda made a new style connector for the new lights though.
Rob
12-19-2002, 08:08 PM
Originally posted by 94_AcCoRd_EX
Mine can be VERY hard to turn sometimes
*UPDATE* I grew a set of nuts and twisted the harness hard enough to get to the bulb out........

thanks guys....:crazy:
94_AcCoRd_EX
12-20-2002, 02:06 AM
Glad you got it figured out :yes:
ebpda9
12-20-2002, 07:36 AM
so no hammer ? ;)
ChrisCantSkate
12-20-2002, 09:43 AM
Originally posted by AccordinStyle
*UPDATE* I grew a set of nuts

hahaha
ShEaNy
12-22-2002, 04:34 PM
lol..nice job...i had that problem... i thought i was going to bust the bulb socket...:loco: :loco: