changing gauge face

[JamieS697]

Trying to change my gauge face but i cant get the cover off there are two screws at the top they came off easy so now half is loose and starts to come out but the rest doesnt want to come out is there extra screws i dont see any

[94_AcCoRd_EX]

Moving to Civic forum.

Step by step is for posting "how-to's"

[nonovurbizniz]

There's a screw behind the hazard switch I believe. if not then it's just a bunch of metal clips. (you gotta pull hard but be careful.)

If you wanna wait around I'm gunna do mine this weekend probobly. I'll write up a how to.

[pdiggitydogg]

http://www.jdmfan.com/technical/cosmetic/whitegauges/

[fadednite]

If your talking about the gauge bezel, which is the black thing around the gauge cluster, there's only 2 screws. AFter that the top part should be loose. Just pull. Don't be scared.

[pdiggitydogg]

no ones saying in which direction to pull...

pull toward you away from the gauges. just put your thumbs on the bottom near the edges and pull straight out toward you...be carefull cause it comes fast out and will crush your thumbs if youre not carefull...this happened to me...

Oh and when you finally get it out and change the faces be really carefull not to break any needles...cause then youre screwed. I broke my temp needle off...but i glued it back on :D

[JamieS697]

They were right what i did was obviously took out the two screws then u take a screw driver and u have to bend it up on both sides of the bottom makes a pop sound then ur good comes right out thx for the help!!! ;)

[sohc_vtec 2NR]

does that black dash trim come right out?


...kluver is an idiot...i have no idea what that means..

[pdiggitydogg]

yeah, 2 screws and pull toward you (2 bottom clips are released that way)