View Full Version : B16 vs B18
ASTS123
12-10-2002, 02:08 PM
I'm looking to find what engine would be better for my del sol(b16 or b18). Just wondering if one was better in some area or are they basicly the same. Thanks
a96710
12-10-2002, 02:28 PM
I think that'll depend on what series B16 or 18 you want. I don't know much about the B16's but the B18a is 130hp, B18b is 140hp and the B18c is 170hp(I think those are right #'s)
ASTS123
12-10-2002, 02:29 PM
it would either be the b18c5 or the b16b
ShEaNy
12-11-2002, 12:18 AM
there almost the same..just different compression... i think..and a bit of horse i think on the b18C5.. i would go with a B18C5...i think thats a Type R engine..
a96710
12-11-2002, 12:36 AM
Yep...B18c5 is a type R engine. I think it's 195hp compared to I think 180hp on the b16b
ShEaNy
12-11-2002, 12:38 AM
2002+.. 220 horse;)
ASTS123
12-11-2002, 09:58 AM
would i be able to put the2002 in my del sol? and if i could haw hard are they to come by?
a96710
12-11-2002, 12:31 PM
I think he's refering to a K20a which they put into the new RSX's. I'm not sure on the availability
ChrisCantSkate
12-16-2002, 09:38 AM
very expensive and you have to make your own mubnts... forget about that one.b18c1 if you were t ask me... whgat do you want to do with the car after the engine is swapped in?
PooH DiGGLianO
12-17-2002, 01:06 PM
I suggest you put a b18a/b(LS Integra) if you want to do a turbo setup. If you're going with a fast N/A engine, go with the b18C5(integra type r). If you're going with a more reliable, but fast engine, then go with the b16A(Civic Si-R I). The rod to stroke ratio is more balanced
Mirkwo0dForest
12-19-2002, 07:39 AM
b16b @ 170 u say... how much do they run.... cause i wuz gonna swap my crap DX engine for a b18c5 but they are super expensive... so... yea...
Mirkwo0dForest
12-19-2002, 07:40 AM
180 HP**.... my mistake
anyway how much for b16b?
a96710
12-19-2002, 07:06 PM
According to Osakajdmmotors.com the B16b is $3700.
http://www.osakajdmmotors.com/engines/b16b.html
pissedoffsol
12-23-2002, 05:02 AM
Originally posted by sheany_91accord
there almost the same..just different compression...
not REMOTELY true. the ONLY thing they share is their tranny.
the block is a totally different cast.
the head is different.
the manifolds are different
the list goes on.
if you want boost- go LS
if you want NA, go b18c spec R
if you want a motor, STAY THE F U C K away from osaka.
don't belive me? read this and the links inside.
http://www.hondaswap.com/forums/index.php?act=ST&f=4&t=3323
Mirkwo0dForest
12-24-2002, 07:40 AM
that link doesn't work pissedoffsol....
pissedoffsol
12-24-2002, 08:20 AM
yeah it does- i just clicked it again
Dr Drew
12-25-2002, 05:51 PM
Originally posted by ChrisCantSkate
b18c1 if you were to ask me...
100% agreed.
ACCORD1993EX
01-01-2003, 05:55 PM
Go with a B18C1 Integra GSR motor. they are better than the type R b18c5 because the handle boost better and they are more buildable than the B16's.
vBulletin v3.5.3, Copyright ©2000-2025, Jelsoft Enterprises Ltd.