Help!! How do u get the peices off the dash???

[JamieS697]

I have a 2001 Civic and i cant get the piece that covers the radio off nor the rest of the vents i need to paint!! i have the two side vents off and painted but cant get the middle two off with the rest of that piece anyone kno please help

[JamieS697]

I need to get the middle piece and rest of my vents off a 2001 civic i have the other two vents off already i am painting all of it but i need to know if there are extra screws im missing or how to take it off please help!

[Rob]

Please don't double post...........

[94_AcCoRd_EX]

Moving to Civic forum...

[BlackDeuceCoupe]

Merging threads...

[blind34_1]

three responses and no one answers him...poor guy.

Well, I don't know if i can either. ive never dealt with the newer civics. I think the center peice that you want is all connected together. Like from the environment controls, down past the stereo, down to your shifter. All of that has to come out. Lay down on your passenger side floor and look at the backside of the center console. There should be mounting screws, but I couldnt tell you where. There should probably also be some screws olong the sides by the shifter, and/or farther back. DONT LOSE THE SCREWS. It sucks when you cant put your dash back together. Also, you'll have to remove your shift knob. it just screws off. (dont paint it.)

again, dont rush your paint job. do many coats, and allow it the dry. Then do a few clear coats.

[BlackDeuceCoupe]

Originally posted by blind34_1
three responses and no one answers him...poor guy...

Thanks for your response!

We didn't have an answer, but it's best to let ppl know why their thread has been closed, moved, merged and so forth; makes for less hard feelings in the long run. No disrespect was intended...

[Addict]

On the 99-00 Civics, the center console is ONE piece.

Not sure on the 01+ though.

[JamieS697]

but was it some kinda clips that held it on? or was it adhesive?

[Addict]

Originally posted by JamieS697
but was it some kinda clips that held it on? or was it adhesive?
Clips. It required some force to get it out. They are little snap in clips(metal).

[nonovurbizniz]

you should get a helms manual yo!

they be having pictures/directions up in that piece.

be careful though you can snap the piece while pulling it.

[JamieS697]

Where do u get that manuel i asked autozone and some other car places and they said there was no manuel

[Addict]

Originally posted by JamieS697
Where do u get that manuel i asked autozone and some other car places and they said there was no manuel

The Chilton or Helms may not be out yet.

www.helminc.com is where to get the Helms manual.

[JamieS697]

too many choices first i did the same as my gauge face i popped it out alil the whole thing started to come out but damn if it isnt all attached. WHat i mean is the radio/cd player is attached to that part somehow and is holding it back im just getting really pissed bc as soon as i get to another step i go back two;(

[nonovurbizniz]

it'd be helpful if you posted a pic of the dash. but I just did this on a 92-95 thisweekend...

on mine THERE IS a screw holding the panel on UNDERNEATH THE HAZARD SWITCH. your best bet is to pry out any buttons/clock CAREFULLY... there will proboly be a screw hidden behind one of them. once this is removed you need to use moderate to healthy force to pull the piece out.

Then you just dis-connect the wire harness' to the switch and clock.

If this doesn't help I suggest contacting helms inc. they should have a manual they usually are ready before the car is released.

good luck.

[JamieS697]

cant post a pic cause i dont have a dig. camera. but i did try to pop off the hazard switch yup had no luck im gonna give it another try in a couple days when i have the free time ill let ya know;(

[nonovurbizniz]

step up the size screw driver your prying with at least once.

I started with a really small flat head then went to like a #2.

It was kind of a pain in the a... but with patience it came out.

good luck